ISO2768-MK 0.5mm~16.0mm Metal Stamping Parts
Stamping characteristics of stainless steel stamping parts and stamping parts
When the parts have high wear, exposed to elements, high temperature and certain corrosive conditions, stainless steel is usually selected for stamping and deep drawing parts. Stainless steel stamping parts and stamping parts are sturdy and durable.
Stainless steel deep drawn parts are commonly used in the automotive industry for fuel delivery parts, brake parts, oxygen sensors, exhaust parts, decorative parts, such as lug nut covers, and so on.
Stainless steel stamping parts have the following ideal characteristics:
Stainless steel is very strong and has a high strength-to-weight ratio
Stainless steel corrosion resistance
Stainless steel is generally considered non-magnetic, but some grades are magnetic (provides electrical benefits)
Stainless steel can be heat treated
Stainless steel has very good wear resistance
No need for plating stainless steel
Stainless steel can be polished in many ways to achieve decorative purposes
Commonly Cast Stainless Steel Alloys:
Stainless Steel 304(1.4308)
This is the most common stainless steel and is applied in different applications. It consists of at least 18% chromium and 8% nickel and has no magnetic properties within its austenitic structure.
Stainless Steel 304L(1.4309)
Corresponds to stainless steel 304. The ‘L’ stands for ‘low carbon’, so this stainless steel has a lower carbon amount to increase weldability and to limit the corrosion sensitivity after welding.
Stainless Steel 316(1.4408)
A better, but more expensive type of corrosion resistant steel is stainless steel 316. This alloy contains at least 16% chromium, 10% nickel and 2% molybdenum. Because of the addition of molybdenum, this stainless steel type is better defended against salt corrosion and acids, and is often applied in chemical industries.
Stainless Steel 316L(1.4409)
Comparable to stainless steel 316 but with a lower carbon level to increase weldability of the stainless steel.
17-4 PH(1.4549)
A high quality stainless steel which is regularly used in the aircraft industry. It is characterized by a high tensile strength, hardness, toughness and is also corrosion resistant.
The latest Stainless Steel Material Grade Standard Contrast
| China GB | Japan JIS | America | Korea KS | EU BS EN | Australia AS |
| Old Grade | New Grade | ASTM | UNS |
| austenitic stainless steel |
| 1Cr17Mn6Ni5N | 12Cr17Mn6Ni5N | SUS201 | 201 | S20100 | STS201 | 1.4372 | 201-2 |
| 1Cr18Mn8Ni5N | 12Cr18Mn9Ni5N | SUS202 | 202 | S20200 | STS202 | 1.4373 | - |
| 1Cr17Ni7 | 12Cr17Ni7 | SUS301 | 301 | S30100 | STS301 | 1.4319 | 301 |
| 0Cr18Ni9 | 06Cr19Ni10 | SUS304 | 304 | S30400 | STS304 | 1.4301 | 304 |
| 00Cr19Ni10 | 022Cr19Ni10 | SUS304L | 304L | S30403 | STS304L | 1.4306 | 304L |
| 0Cr19Ni9N | 06Cr19Ni10N | SUS304N1 | 304N | S30451 | STS304N1 | 1.4315 | 304N1 |
| 0Cr19Ni10NbN | 06Cr19Ni9NbN | SUS304N2 | XM21 | S30452 | STS304N2 | - | 304N2 |
| 00Cr18Ni10N | 022Cr19Ni10N | SUS304LN | 304LN | S30453 | STS304LN | - | 304LN |
| 1Cr18Ni12 | 10Cr18Ni12 | SUS305 | 305 | S30500 | STS305 | 1.4303 | 305 |
| 0Cr23Ni13 | 06Cr23Ni13 | SUS309S | 309S | S30908 | STS309S | 1.4833 | 309S |
| 0Cr25Ni20 | 06Cr25Ni20 | SUS310S | 310S | S31008 | STS310S | 1.4845 | 310S |
| 0Cr17Ni12Mo2 | 06Cr17Ni12Mo2 | SUS316 | 316 | S31600 | STS316 | 1.4401 | 316 |
| 0Cr18Ni12Mo3Ti | 06Cr17Ni12Mo2Ti | SUS316Ti | 316Ti | S31635 | - | 1.4571 | 316Ti |
| 00Cr17Ni14Mo2 | 022Cr17Ni12Mo2 | SUS316L | 316L | S31603 | STS316L | 1.4404 | 316L |
| 0Cr17Ni12Mo2N | 06Cr17Ni12Mo2N | SUS316N | 316N | S31651 | STS316N | - | 316N |
| 00Cr17Ni13Mo2N | 022Cr17Ni13Mo2N | SUS316LN | 316LN | S31653 | STS316LN | 1.4429 | 316LN |
| 0Cr18Ni12Mo2Cu2 | 06Cr18Ni12Mo2Cu2 | SUS316J1 | - | - | STS316J1 | - | 316J1 |
| 00Cr18Ni14Mo2Cu2 | 022Cr18Ni14Mo2Cu2 | SUS316J1L | - | - | STS316J1L | - | - |
| 0Cr19Ni13Mo3 | 06Cr19Ni13Mo3 | SUS317 | 317 | S31700 | STS317 | - | 317 |
| 00Cr19Ni13Mo3 | 022Cr19Ni13Mo3 | SUS317L | 317L | S31703 | STS317L | 1.4438 | 317L |
| 0Cr18Ni10Ti | 06Cr18Ni11Ti | SUS321 | 321 | S32100 | STS321 | 1.4541 | 321 |
| 0Cr18Ni11Nb | 06Cr18Ni11Nb | SUS347 | 347 | S34700 | STS347 | 1.455 | 347 |
| austenitic -ferrite stainless steel (duplex stainless steel) |
| 0Cr26Ni5Mo2 | - | SUS329J1 | 329 | S32900 | STS329J1 | 1.4477 | 329J1 |
| 00Cr18Ni5Mo3Si2 | 022Cr19Ni5Mo3Si2N | SUS329J3L | - | S31803 | STS329J3L | 1.4462 | 329J3L |
| ferrite stainless steel |
| 0Cr13Al | 06Cr13Al | SUS405 | 405 | S40500 | STS405 | 1.4002 | 405 |
| - | 022Cr11Ti | SUS409 | 409 | S40900 | STS409 | 1.4512 | 409L |
| 00Cr12 | 022Cr12 | SUS410L | - | - | STS410L | - | 410L |
| 1Cr17 | 10Cr17 | SUS430 | 430 | S43000 | STS430 | 1.4016 | 430 |
| 1Cr17Mo | 10Cr17Mo | SUS434 | 434 | S43400 | STS434 | 1.4113 | 434 |
| - | 022Cr18NbTi | - | - | S43940 | - | 1.4509 | 439 |
| 00Cr18mo2 | 019Cr19Mo2NbTi | SUS444 | 444 | S44400 | STS444 | 1.4521 | 444 |
| martensitic stainless steel |
| 1Cr12 | 12Cr12 | SUS403 | 403 | S40300 | STS403 | - | 403 |
| 1Cr13 | 12Cr13 | SUS410 | 410 | S41000 | STS410 | 1.4006 | 410 |
| 2Cr13 | 20Cr13 | SUS420J1 | 420 | S42000 | STS420J1 | 1.4021 | 420 |
| 3Cr13 | 30Cr13 | SUS420J2 | - | - | STS420J2 | 1.4028 | 420J2 |
| 7Cr17 | 68Cr17 | SUS440A | 440A | S44002 | STS440A | - | 440A |
Different Types of Stainless Steel
| Material No. | Symbol | Similar to | Heat treatment | Proof stress Rp0,2 | Tensile strength (N/mm²) | Elongation (%) | Hardness |
| 1.4008 | GX7CrNiMo12-1 | AISI 410 | Refining | ≥ 440 | 590-790 | ≈ 15 | ≥ 90 HRb |
| 1.4027 | GX20Cr14 | - | Refining | ≥ 400 | 590-790 | ≈ 15 | 18-50 HRc |
| 1.4036 | GX46Cr13 | - | Refining | - | 750-900 | - | 15-53 HRc |
| 1.4059 | GX22CrNi17 | - | Refining | 600- 750 | 800-950 | ≈ 8 | 22-50 HRc |
| 1.4162 | X2CrMnNiN21-5-1 | LDX2101 ® | Solution annealing + quench hardening | - | - | - | - |
| 1.4308 | GX5CrNi19-10 | AISI 304 / CF8 | Solution annealing + quench hardening | > 175 | > 440 | > 30 | 75-90 HRb |
| 1.4309 | GX2CrNi19-11 | AISI 304L / CF3 | Casting condition | > 210 | 440-460 | > 30 | 70-80 HRb |
| 1.4317 | GX4CrNi13-4 | - | Refining | > 650 | 800-1000 | > 15 | 22-30 HRc |
| 1.4408 | GX5CrNiMi19-11-2 | AISI 316 / CF8M | Solution annealing + quench hardening | > 200 | > 450 | > 20 | 75-90 HRb |
| 1.4409 | GX2CrNiMi19-11-2 | AISI 316L / CF3M | Solution annealing + quench hardening | > 200 | > 450 | > 20 | 75-90 HRb |
| 1.4468 | GX2CrNiMoN25-6-3 | - | Casting condition | - | > 650 | > 22 | > 92 HRb |
| 1.4470 | GX2CrNiMoN22-5-3 | - | Normal annealing | > 450 | 680-880 | > 30 | > 93 HRb |
| 1.4827 | GX8CrNiNb19-10 | - | Solution annealing + quench hardening | > 175 | > 440 | > 20 | 75-95 HRb |
| 1.4815 | GX8CrNiNb19-10 | - | - | - | - | - | - |
Product Tags:
|
|
ISO2768-MK High Strength Stainless Steel Stamping Parts Images
|
